Gas Burners |
|
|
|
| Pipe Burner with Venturi Air Mixer
Photograph shows a 2" diameter x 36" flame length (6" flame height) pipe burner with Venturi air mixer, 90O ell, cast iron legs, cast iron pilot, and safety valve (100% shut-off type). Base list price is $597. Same burner with a 72" (6') long flame is $1,069. Applications: |
|
|
|
Buzzer pipe burners provide a simple and efficient way to heat a large variety of processing tanks, ovens and cookers. Pipe burners can be used to heat large, small, square, rectangular, sloping, V-bottom, or any specialty tank. Pipe burners provide a very uniform heat source, spreading the gas flame over the entire length of the item being heated. |
|
| Rectangular Burner
Photograph shows a 315 rectangular burner rated at 50,000 BTUH with shut-off valve, cast iron stand, and safety valve (100% shut-off). Base list price is $587. Applications: |
|
|
|
All cast iron burner for heating tanks, vats, cookers, cleaning tanks, rinse tanks, and many industrial and commercial applications. The Buzzer rectangular burner will outlast and outperform mass-produced burners stamped out of sheet metal when resistance to radiated heat or high temperatures are required. Sizes from 30,000 BTUH to 90,000 BTUH. |
|
| Radial Ring Burner
Photograph shows our 308 radial ring burner rated @ 75,000 BTUH. Burner is shown with shut-off valve, pilot burner, cast iron stand and safety valve (100% shut-off). Base list price is $540. Applications: |
|
|
|
All cast iron burner for heating tanks, vats, cookers, cleaning tanks, rinse tanks, and many industrial and commercial applications. The Buzzer ring burner will outlast and outperform mass-produced burners stamped out of sheet metal when resistance to radiated heat or high temperatures are required. Sizes from 6" diameter (30,000 BTUH) to 21" diameter (270,000 BTUH) available. |
|
| Raised Port Multi-Ring Burner
Photograph shows V13 raised port ring burner equipped with no. 50 cast iron pilot, shut-off valve, solenoid valve with bypass and safety valve (100% shut-off type). Rated @ 232,000 BTUH. Base list price is $2,931. Applications: |
|
|
|
The raised port ring burner is a heavy duty multi-ring burner. Each ring segment comes equipped with its own Venturi and shut-off gas cock. Ideal for industrial settings in which resistance to high ambient and radiated heat is required. Can be used for melting metals (lead, tin, solder, babbitt, zinc) or for heating evaporating, cleaning, or rinse tanks. Five standard sizes available from 50,000 to 550,000 BTUH. Special sizes up to 1,500,000 BTUH can be made to order. |
|
| Venturi High Pressure Nozzle Burner
Photograph shows our VNB 200-HP high pressure nozzle burner rated at 390,000 BTUH at 10 PSI gas pressure. Packaged unit includes Baso safety valve (100% shut-off), Buzzer no. 50-HP cast iron pilot, sensor, needle (adjustable flow) valve, and 0-30 PSI gas pressure gauge. Base list price as shown is $874. Applications: |
|
|
|
|
|
|
|
 |
|
|
|
|
Venturi high pressure nozzle burner at work: a series of photographs of our VNB 125-HP in use at a foundry to repair a die casting furnace in which the pot had failed, emptying metal into the combustion chamber. In such a repair, it is important to remove all metal from the combustion chamber before a new pot is put into service. Over 300 lbs. of zinc and dross were removed in the process pictured using the VNB 125-HP as well as a small VNB 50-HP at the drain spout to keep the drain open. (After all the metal was removed, all of the inside brick work was scraped with a hacksaw blade and then vacuumed. The chamber was then re-sealed with Grefpatch coating.) Photograph one shows a VNB 125-HP being used to melt zinc, dross, and flux from combustion chamber. Photograph two shows a close-up of the burner re-heating the zinc metal so it can be removed and the furnace repaired. Photograph three shows metal and dross being removed with a fabricated scraper to "push" metal out through the drain hole in the bottom of the furnace. (Two person job!) |
|
|
|
The Buzzer high pressure nozzle burner offers a powerful and efficient torch flame using high pressure gas (1 PSI and above). It can operate on natural gas or propane to provide quick and very intense heat without the need for blowers, compressed air, or complicated piping. Our all cast iron burners are ideal for metal melting, foundry use, forging, heat treating, glass heating, and firing ceramics or pottery.